How to Remove Water from Your iPhone’s Battery (Working Methods)

How to Remove Water from Your iPhone’s Battery (Working Methods)

If you ever find yourself in a situation where your phone is wet, there are a few things you can do. Here’s how to get water out of your iPhone. The first thing you should do is turn off the device and take it apart as much as possible without breaking anything. You’ll want to remove any battery or SIM card that might be inside before letting it dry for 24 hours. Once the device has been dried, replace all the parts and try turning on the phone again!

Getting water into your iPhone is the absolute worst-case scenario. Although the newest iPhones (iPhone 7 and later, including the iPhone 12 series) have an IP rating, they are not waterproof. Water also has the potential to cause damage to your phone’s internal components if you drop it in water or submerge it for a long amount of time, as well as make other problems. Furthermore, if you have an older iPhone, any water on or inside of the device can wreak havoc. If your iPhone has been immersed in water or has water inside the camera, speaker, or lightning port, follow these steps to remove it.

Add Read: The Top 10 Google Picasa Replacements That You Should Be Using

How to Get Rid of Water in Your iPhone (Updated May 2021)

Even if your iPhone has an official IP rating, it’s not recommended that you submerge it in water. That’s because, even for iPhones with an IP rating, Apple does not cover water damage under warranty. So if something goes wrong, you’ll be on your own (pun intended).

The iPhone’s lightning port or speaker gets flooded with water more frequently than not, resulting in a muffled sound. However, in certain situations, you could discover water or moisture inside the camera lens, and drying it out is more difficult. Water is the most common reason for an iPhone to not charge. So in this post, we’ll teach you how to get water out of your iPhone’s Lightning port, camera lens, and other places on your device. We’ll also look at how to dry out your iPhone using both rice and without it. You may go to any chapter of this post using the table of contents below.

How to Remove Water from iPhone Speakers and Charging Port

The majority of iPhone problems fall under this category, so we’ll start there. If you want to get water out of your iPhone without using rice, there are a number of ways to do so, including apps, Siri shortcuts, and more. They may help you get water out of your iPhone’s speakers and charging port. Let’s go through them one by one.

First, Try Using Gravity

The first thing you should do if your iPhone is water damaged is tried to use gravity to get it out. Simply tap on the top of your iPhone’s speaker while it is resting on the floor. You may also utilize a hairdryer to heat up the bottom of your iPhone and aid in drying it.

The following method can also be used to free any water droplets trapped inside your iPhone speaker, allowing them to escape through the speaker grill and onto the ground.

Use the Siri Shortcut to Get Water Out of Your Speaker

Many of you may be aware that the Apple Watch has a clever technique to get water out of the speaker grilles. It’s a good idea to remove the rubber tip from the hose and insert it into this drain tube. You may play sounds on your speaker to draw water out, and it works well. Surprisingly, the iPhone does not include any built-in solutions. That doesn’t imply you can’t make one for yourself or utilize Siri shortcuts generated by other iPhone users to empty the water out of your iPhone speaker, though. Follow the steps below:

To begin, you must enable the installation of suspicious shortcuts on your iPhone. Go to Settings > Shortcuts and enable the Allow Untrusted Shortcuts option. To confirm the action, you must provide your passcode.

Add Read: Performing a Hard Reset on Your Chromebook (Four Methods Explained)

Add the Water Eject quick-launch to your iPhone next. Download and install it from this link. To add a prohibited shortcut, go to the Add Shortcut page that opens up at the end of the process, scroll to the bottom, and tap the Add Untrusted Shortcut button. This is a nifty shortcut created by user Josh0678, and you may see more such shortcuts by going to this link if you’re interested.

Open the Shortcut app and go to the My Shortcuts tab from inside. Tap the Water Eject option in the menu. To start, open the Start menu and choose Begin from the list of options that appears. The shortcut will begin working immediately. When you press the shortcut, you should hear a number of noises and the water should start to spray from your speaker.

  • To remove water from a speaker, use an application.

Eject Water Out of a Speaker with an App

You can also use apps that provide similar features to Siri Shortcuts. If you don’t like Siri Shortcuts, or you don’t trust a Shortcut created by an unknown user on the internet, you can look into others that perform the same task. The most popular application to remove water from an iPhone speaker is called Sonic.

Download it for free from the App Store ( Free ).

After you’ve downloaded the app, launch it. Sonic uses sound waves to assist you in removing water from your iPhone speaker. You can also adjust the sound’s tone by adjusting the frequency setting. This controls how frequently the sound will play through your speaker, allowing you to vary high-pitched and low-pitted sounds to get the best results.

Tap on Play after you’ve decided on the frequency. When the water has been fully expelled, stop the sound by tapping on Stop.

This app should remove water from your iPhone speakers for you and it’s free to use, which is fantastic.

How to Remove Water from Your iPhone’s Battery (Working Methods)

Use a Website

There are websites that let you play sounds to remove water from iPhone speakers if neither an app nor a Shortcut seems appealing.

On your iPhone, go to this website.

To swap the note value for another key, tap on the frequency number (by default, it will show 440Hz) and type 165Hz.

Click the Play button to begin listening to the audio. With this, any water that has gotten trapped in your iPhone speaker should be simple to remove.

A water-damaged iPhone can be fixed with rice.

Many individuals swear by using rice to repair water damage in electronics. I’ve never tried this approach, and I can’t vouch for its effectiveness. However, rice is a fairly efficient absorbent, which means it can assist your water-damaged iPhone to some extent.

The process is simple. Turn off your iPhone and place it in a container of uncooked rice for about 15 minutes. Make a paste out of it by mixing it with water. Then, fill a saucepan 3/4 of the way up with rice and add enough water to cover all the grains. Bring to a simmer over medium heat. When cooked, drain any excess liquid from the pan and place your rice in one layer on a cool surface for around 2 days The rice should be able to absorb some of the moisture from your iPhone. This trick can be used to fix issues like moisture inside the iPhone camera lens, charging port blockage, and so on.

To fix a water-damaged iPhone, seal it in Silica Gel.

Silica gel, on the other hand, is something that takes up a lot of dampness and is therefore utilized to keep rice hydrated. You’ve undoubtedly seen these in shoe boxes or bags you purchase. Silica gel packets, which are small and contain a lot of moisture, prevent your clothes, bags, shoes, and other belongings from suffering damage from humidity.

If you have silica gel on hand, you should give it a shot to help you repair your iPhone if it has water damage. Put silica gel packets on top of your iPhone and let it sit for a few days. This should help to prevent your iPhone from getting too wet.

Add Read: For the First Time, Flipkart Is Offering a 15-Day ‘Love It or Return It’ Trial Period for Samsung’s Galaxy Z Flip 3 and Z Fold 3

How to Remove Water from an iPhone Camera Lens

If moisture builds up inside your iPhone’s camera lens, the pictures will come out blurry and speckled. Plus, it’s not good news for your iPhone’s longevity.

The most straightforward approach to try and get water out of your iPhone camera is to bury the device in rice or place it between sheets of silica gel. It’s safe to let them sit on the phone after it has been fully charged as many of these cases include a hydrophobic material that helps to keep moisture out.

You may learn more about how to remove water from the iPhone camera lens by reading through the sections above. When your iPhone camera freezes or you get a black screen, we recommend that you look at our related troubleshooting guide.

Bring Your iPhone to an Apple Store for Repair

You may seek assistance from an Apple Store or a certified service center if nothing else appears to work or if you simply want your iPhone examined by an expert.

If you have a waterlogged phone, the Apple Genius or repair personnel should be able to assist you in removing the moisture or water from it. They may perhaps even be able to repair your iPhone if something goes wrong. However, iPhones have water damage indicators built-in, so your repair person will be aware of the water damage. There’s no use in trying to conceal that information from them.

Solutions for a Wet iPhone at Home

If you think you’re a DIY enthusiast, consider drying out your iPhone yourself.

just remove any dampness from the insides of your iPhone’s body, not just the charging port or speaker. You may also add bleach powder or drain less frequently, especially if you used tap water. Furthermore, by cleaning it out properly, you’ll be doing much better than using rice or silica gel. It’s best to power your iPhone down when you don’t need it. If you leave the phone on all of the time, any battery loss is irreversible. It’s best to turn off the iPhone when not in use to extend its life. Please keep in mind that silica gel works much better if you first open up your iPhone and then wrap

We would also like to remind you that shutting down your iPhone will void your warranty. Turn off Find My iPhone. This disables remote erasing. If you’re not sure how to do it, don’t try this until your iPhone’s warranty has expired or you’re confident in your skills with iPhone tools.

How to Remove Water from Your iPhone’s Battery (Working Methods)

How to Save Your iPhone from a Water Damage-Inappropriate Situation

Losing an iPhone to water damage might be frustrating because you may feel powerless. Furthermore, even with more recent IP-rated iPhones, there’s no assurance that your iPhone will survive being exposed to water in any form. If your iPhone has been exposed to water, you should check the Lightning connector and the speakers for moisture. If you have water in your iPhone, don’t panic because it isn’t short-circuiting yet.

Add Read: The Best 15 Amazon Echo Replacements You Can Purchase

So, how do you get rid of water from your iPhone speaker, charging port, and camera? Have you ever attempted the rice trick or used sound apps to repair a water-damaged iPhone? Did silica gel work better for you, or did the process you used work well for you? Let us know what you think in the comments area below.

For more news and trends from the market, visit techstry.net.

Related Posts